Publikace
2023
REBEJ, M.; JUŘENA, T.; VONDÁL, J.; FUENTE HERRAIZ, D.; ČERVENÝ, J.; JEGLA, Z. Numerical simulations and validation of single- and two-phase flow in a stirred lab-scale photobioreactor. BIOSYSTEMS ENGINEERING, 2023, roč. 230, č. 22.6.2023,
s. 35-50. ISSN: 1537-5110.
Detail | WWW2022
REBEJ, M.; VONDÁL, J.; JUŘENA, T.; BRUMMER, V.; JEGLA, Z.; NAĎ, M. Numerical simulations of mass transfer prediction in a photobioreactor. Chemical Engineering Transactions, 2022, roč. 93, č. 1,
s. 127-132. ISSN: 2283-9216.
Detail | WWWREBEJ, M.; VONDÁL, J.; JUŘENA, T.; NAĎ, M.; JEGLA, Z. Sensitivity study of a bubble size on mass transfer in a CFD model of a bubble-column photobioreactor. In ENGINEERING MECHANICS 2022. Engineering Mechanics .... Brno, Czech Republic: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2022.
s. 329-332. ISBN: 978-80-86246-48-2. ISSN: 1805-8256.
Detail | WWW2021
REBEJ, M.; VONDÁL, J.; JEGLA, Z. Numerical study of the air injection method into the flat-panel photobioreactor. Proceedings of the 6th World Congress on Momentum, Heat and Mass Transfer (MHMT 2021). Proceedings of the World Congress on Momentum, Heat and Mass Transfer. Ottawa, Canada: 2021.
s. 305-1 (305-8 s.) ISBN: 978-1-927877-89-0. ISSN: 2371-5316.
Detail | WWW2020
JUŘENA, T.; VONDÁL, J.; REBEJ, M.; JEGLA, Z. EULERIAN TRACKING OF CUMULATIVE LIGHT DOSE IN MICROALGAL PHOTOBIOREACTOR. In Engineering Mechanics 2020. Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020.
s. 254-257. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
Detail | WWWREBEJ, M.; VONDÁL, J.; JUŘENA, T.; JEGLA, Z. Evaluation of different drag models for simulations of a bubbly flow in a flat-panel photobioreactor. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... 1. Brno, Czech Republic: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2020.
s. 432-435. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
Detail | WWW2019
JUŘENA, T.; HÁJEK, J.; VONDÁL, J. Fluid dynamics of stirred photobioreactor cuvette. Book of Abstracts of 12th European Congress of Chemical Engineering and 5th European Congress of Applied Biotechnology. Via Giuseppe Colombo 81A, 20133 Milano, Italy: AIDIC Servizi SRL, 2019.
s. 1549-1550. ISBN: 978-88-95608-75-4.
DetailHÁJEK, J.; VONDÁL, J.; JUŘENA, T.; SLÁMA, J. What the Combustion Engineer Gains from CFD Modeling: Gas Furnace. Chemical Engineering and Technology, 2019, roč. 42, č. 4,
s. 835-842. ISSN: 1521-4125.
Detail | WWWJUŘENA, T.; HÁJEK, J.; REBEJ, M.; VONDÁL, J. Jak se daří mikrořasám v CFD modelech fotobioreaktorů?. 2019.
Detail2018
HÁJEK, J.; VONDÁL, J. Engineering combustion modelling of 300 kW furnace. In Proceedings of the 23rd International Congress of Chemical and Process Engineering (CHISA 2018) and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018). Prague, Czech Republic: Czech Society of Chemical Engineering, 2018.
s. 1095.1-1095.6. ISBN: 978-1-5108-8119-8.
Detail | WWW2017
VONDÁL, J.; DOHNAL, M.; JUŘENA, T.; ZEJDA, V.; HÁJEK, J. Velocity measurement downstream of axial guide vane swirl generator. In Proceedings of the 22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016. Praha: ČSCHI, 2017.
s. 283.1-283.6. ISBN: 9781510859623.
Detail | WWWVONDÁL, J.; KOTEK, L.; HÁJEK, J. Dry ice blasting for cleaning - measurement of pellets velocity behind the blasting nozzle. In Proceedings of the 22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016. Praha: ČSCHI, 2017.
s. 1287-1294. ISBN: 9781510859623.
Detail | WWW2016
MIČIETA, J.; VONDÁL, J.; JANDAČKA, J.; LENHARD, R. Optimization principle of operating parameters of heat exchanger by using CFD simulation. In EPJ Web of Conferences. EDP Sciences, 2016.
s. 1-7. ISSN: 2100-014X.
Detail | WWW | Plný text v Digitální knihovně2015
VONDÁL, J.; JEGLA, Z.; HÁJEK, J. Fired heaters: validation of design parameters based on numerical modelling. In 10th European Conference on Industrial Furnaces and Boilers. Rio Tinto, Portugal: CENERTEC, 2015.
s. 1-12. ISBN: 978-972-99309-7- 3.
DetailVONDÁL, J.; HÁJEK, J. Wall heat transfer in gas-fired furnaces: Effect of radiation modelling. Applied andComputational Mechanics, 2015, roč. 9, č. 1,
s. 67-78. ISSN: 1802- 680X.
Detail | WWWDOHNAL, M.; HÁJEK, J.; VONDÁL, J. Unsteadiness and Spatio-Temporal Statistics in Intermediate Effervescent Spray Region. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.45. CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi Srl, 2015.
s. 1027-1032. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
DetailVONDÁL, J.; HÁJEK, J.; DOHNAL, M. Numerical study of stirred tank with multiphase system. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi Srl, 2015.
s. 1051-1056. ISBN: 978-88-95608-36- 5. ISSN: 2283- 9216.
DetailVONDÁL, J. Testování a zlepšení parametrů trysky pro poloautomatické čištění vzduchotechnického potrubí suchým ledem. 2015.
s. 1-18.
DetailJEGLA, Z.; VONDÁL, J.; HÁJEK, J. Standards for fired heater design: An assessment based on computational modelling. Applied Thermal Engineering, 2015, roč. 89, č. 1,
s. 1068-1078. ISSN: 1359-4311.
Detail | WWWHÁJEK, J.; DOHNAL, M.; VONDÁL, J.; BROUKAL, J. Analysis of effervescent spray quality for oil-fired furnace application. Clean Technologies and Environmental Policy, 2015, roč. 17, č. 5,
s. 1195-1205. ISSN: 1618-954X.
Detail | WWWVONDÁL, J. Výpočet zavíření v kalcinačním kanálu. 2015.
s. 1-18.
DetailVONDÁL, J.; HÁJEK, J.; DOHNAL, M. Výpočet zavíření v kalcinačním kanálu. 2015.
s. 1-22.
Detail2014
JEGLA, Z.; HÁJEK, J.; VONDÁL, J. Numerical Analysis of Heat Transfer in Radiant Section of Fired Heater with Realistic Imperfect Geometry of Tube Coil. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. CHEMICAL ENGINEERING TRANSACTIONS. Milan, Italy: Aidic Servizi S.r.l., 2014.
s. 889-894. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
DetailVONDÁL, J. Návrh kruhové trysky pro poloautomatické čištění vzduchotechnického potrubí suchým ledem. 2014.
s. 1-30.
DetailVONDÁL, J.; HÁJEK, J. Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. CHEMICAL ENGINEERING TRANSACTIONS. Milan, Italy: AIDIC Servizi S.r.l., 2014.
s. 907-912. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail | WWWVONDÁL, J.; HÁJEK, J.; JEGLA, Z. Počítačové modelování tepelných toků v pecích procesního průmyslu. In Sborník ANSYS 2014 Setkání uživatelů a konference. 1. Dolní Morava, ČR: 2014.
s. 1-17. ISBN: 978-80-905040-9- 7.
DetailVONDÁL, J.; HÁJEK, J. Výpočet proudění v kalcinačním kanále. 2014.
s. 1-29.
DetailBROUKAL, J.; HÁJEK, J.; VONDÁL, J. An experimental study of effervescent sprays: axial evolution of mean drop diameter. In 26th European Conference on Liquid Atomization & Spray Systems. Bremen, Germany: 2014.
s. 1-6. ISBN: 978-3-88722-744- 9.
DetailHÁJEK, J.; JEGLA, Z.; VONDÁL, J. CFD analysis of tube circumference heat flux variation in radiant section of fired heater. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014.
s. 237-240. ISBN: 978-88-7431-727- 1. ISSN: 2305- 5995.
Detail | WWWHÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall- Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014.
s. 331-336. ISBN: 978-963-9970-48- 9. ISSN: 1570- 7946.
DetailVONDÁL, J.; VAN DER STEEN, M.; TUMMERS, M. Tracking of Impiging Jet Flame. In ENGINEERING MECHANICS 2014. Engineering mechanics 2014. 2014.
s. 692-695. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail2013
VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, roč. 35, č. 1,
s. 1153-1158. ISSN: 1974- 9791.
DetailHÁJEK, J.; JEGLA, Z.; VONDÁL, J.; JUŘENA, T.; BROUKAL, J. CFD simulace spalování plynu v peci 2511-H01/ 1. Brno: 2013.
DetailVONDÁL, J.; HÁJEK, J. Výpočet proudění v kalcinačním kanále. 2013.
s. 1-16.
DetailVONDÁL, J.; HÁJEK, J. Comparison of SAS Turbulence Model to the SST k-omega in Non- Premixed Combustion Simulation. Proceedings of 14th European Turbulence Conference. Lyon, Francie: 2013.
s. 1-2.
Detail | WWW2012
VONDÁL, J.; HÁJEK, J. Swirling flow prediction in model combustor with axial guide vane swirler. Chemical Engineering Transactions, 2012, roč. 29, č. 2,
s. 1069-1074. ISSN: 1974- 9791.
DetailBROUKAL, J.; VONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of wall heat fluxes in a gas fired furnace: practicable models for swirling non- premixed combustion. Chemical Engineering Transactions, 2012, roč. 29, č. 2,
s. 1399-1404. ISSN: 1974- 9791.
DetailLACINA, K.; VONDÁL, J.; SKLÁDAL, P. A novel approach to the uniform distribution of liquid in multi-channel (electrochemical) flow- through cells. ANALYTICA CHIMICA ACTA, 2012, roč. 727, č. 5,
s. 41-46. ISSN: 0003- 2670.
Detail2011
VONDÁL, J.; HÁJEK, J. Prediction of flow through swirl generator and validation by measured data. In 13th European Turbulence Conference 2011 (ETC13). Journal of Physics: Conference Series. Varšava, Polsko: IOPscience, 2011.
s. 1-6. ISBN: 9781622765430. ISSN: 1742- 6588.
Detail | WWWVONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of swirling non-premixed gas flames in industrial- scale furnace. In Proceedings of the 9th european Conference on Industrial Furnaces and Boilers. Estoril, Portugal (PT): 2011.
s. 1-9. ISBN: 978-972-99309-6- 6.
Detail2010
VONDÁL, J.; HÁJEK, J.; KERMES, V. Local wall heat fluxes in swirling non-premixed natural gas flames in large-scale combustor: Data for validation of combustion codes. Chemical Engineering Transactions, 2010, roč. 21, č. 2,
s. 1123-1128. ISSN: 1974- 9791.
Detail | WWW2009
VONDÁL, J.; HÁJEK, J. Experimental and numerical analysis of wall heat transfer in non- premixed gas combustor. Chemical Engineering Transactions, 2009, roč. 18, č. 1,
s. 587-592. ISSN: 1974- 9791.
Detail | WWW
*) Citace publikací se generují jednou za 24 hodin.