Publikace
2024
VALENA, M.; OMASTA, M.; KLAPKA, M.; GALAS, R.; NAVRÁTIL, V.; KŘUPKA, I.; HARTL, M. Case Study: Correlations Between Curve Squeal, Weather Conditions, and Traction in a Tram Loop. Tribology in Industry, 2024, roč. 46, č. 4,
s. 695-708. ISSN: 0354-8996.
Detail | WWWNAVRÁTIL, V.; GALAS, R.; KLAPKA, M.; KVARDA, D.; OMASTA. Wheel Squeal Mitigation Under Water Lubrication. Tribology in Industry, 2024, roč. 46, č. 3,
s. 418-431. ISSN: 0354-8996.
Detail | WWW2023
KLAPKA, M.; MAZŮREK, I.; NOVÁK, P. Experimental verification of the new methodology for assessment of the relative adhesion. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2023, roč. 91, č. 4,
s. 342-359. ISSN: 0143-3369.
Detail | WWW2022
OMASTA, M.; KLAPKA, M.; ROSENDORF, P. Field test report of noise monitoring device for the control of the noise-reduction system. 2022.
s. 1-28.
DetailOMASTA, M.; NAVRÁTIL, V.; GABRIEL, T.; GALAS, R.; KLAPKA, M. Design and development of a twin disc test rig for the study of squeal noise from the wheel – rail interface. Applied Engineering Letters, 2022, roč. 7, č. 1,
s. 10-16. ISSN: 2466-4677.
Detail | WWW | Plný text v Digitální knihovněNAVRÁTIL, V.; GALAS, R.; KLAPKA, M.; KVARDA, D.; OMASTA, M.; SHI, L.; DING, H.; WANG, W.; KŘUPKA, I.; HARTL, M. Wheel Squeal Noise in Rail Transport: The Effect of Friction Modifier Composition. Tribology in Industry, 2022, roč. 44, č. 3,
s. 361-373. ISSN: 0354-8996.
Detail | WWW2021
OMASTA, M.; NAVRÁTIL, V.; GALAS, R.; KLAPKA, M. Design of the twin-disc test rig for the study of wheel squeal noise. 10th International Conference on Tribology – BALKANTRIB '20 PROCEEDINGS. Belgrade: University of Belgrade, Faculty of Mechanical Engineering, 2021. ISBN: 978-86-6060-073-0.
Detail2018
HALAMA, J.; KLAPKA, M.; MAZŮREK, I. Experimental Methodology for Acoustic Diagnostics of Shock Absorbers. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2018, roč. 66, č. 5,
s. 1119-1125. ISSN: 1211-8516.
Detail | WWWRAUDENSKÝ, M.; BOHÁČEK, J.; KLAPKA, M. Acoustics Silencer Study. 2018.
s. 1-43.
Detail2017
KLAPKA, M.; GÁŠEK, M.; RUŠAR, F.; KUBRICKÝ, J.; PAVLÍČEK, D. KONSTRUKCE TESTERU AUTOMATICKÝCH NAPÍNÁKŮ ŘEMENE. Brno: 2017.
DetailGALAS, R.; OMASTA, M.; KLAPKA, M.; KAEWUNRUEN, S.; KŘUPKA, I.; HARTL, M. Case study: the influence of oil-based friction modifier quantity on tram braking distance and noise. Tribology in Industry, 2017, roč. 39, č. 2,
s. 198-206. ISSN: 0354-8996.
Detail | WWW | Plný text v Digitální knihovněKLAPKA, M.; MAZŮREK, I.; KUBÍK, M.; MACHÁČEK, O. Reinvention of the EUSAMA diagnostic methodology. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2017, roč. 4, č. 74,
s. 304-318. ISSN: 0143-3369.
Detail | WWW2016
KLAPKA, M.; NOVÁK, P. Závěrečná odborná zpráva projektu TAČR GAMA č. TG01010054- 5 rok 2016. Brno: 2016.
s. 1-16.
DetailKLAPKA, M.; MAZŮREK, I.; MACHÁČEK, O.; KUBÍK, M. Twilight of the EUSAMA diagnostic methodology. MECCANICA, 2016, roč. 52, č. 9,
s. 2023-2034. ISSN: 0025-6455.
Detail | WWWKLAPKA, M.; MAZŮREK, I.; MACHÁČEK, O. ANALYSIS OF CAUSES OF FALSE- NEGATIVE EVALUATION OF EUSAMA METHODOLOGY FOR SUSPENSION ASESSMENT. In Engineering mechanics 2016. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2016.
s. 282-285. ISBN: 978-80-87012-59- 8.
Detail | WWWPANÁČEK, T.; KLAPKA, M. Reduction of pneumatic tyred roller fuel consumption. Applied Mechanics and Materials, 2016, roč. 821, č. 1,
s. 614-619. ISSN: 1662-7482.
Detail2015
KLAPKA, M. Odborná zpráva projektu TAČR GAMA č. TG01010054- 5 rok 2015. Brno: 2015.
DetailSTRECKER, Z.; ROUPEC, J.; MAZŮREK, I.; KLAPKA, M. Limiting factors of the response time of the magnetorheological damper. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2015, roč. 47, č. 2,
s. 541-550. ISSN: 1383-5416.
Detail | WWWSTRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; KLAPKA, M. Influence of MR damper response time on semiactive suspension control efficiency. MECCANICA, 2015, roč. 50, č. 8,
s. 1949-1959. ISSN: 0025-6455.
Detail | WWWSTRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; MACHÁČEK, O.; KUBÍK, M.; KLAPKA, M. Design of magnetorheological damper with short time response. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2015, roč. 26, č. 14,
s. 1951-1958. ISSN: 1045-389X.
DetailKLAPKA, M.; PANÁČEK, T.; NEVRLÝ, J. Experimental rig for simulation of hydromechanical system with energy regeneration. Engineering Mechanics, 2015, roč. 21, č. 5,
s. 305-309. ISSN: 1805- 4633.
Detail | WWW2014
SZENDIUCH, I.; OTÁHAL, A.; PSOTA, B.; KLAPKA, M. Vibration Testing as a Tool to Optimize the Configuration of the PCBs. In IMAPS Proceedings. 1. San Diego, USA: IMAPS, 2014.
s. 50-54. ISBN: 978-0-9909028-0- 5.
DetailPANÁČEK, T.; KLAPKA, M.; NĚMEC, Z. Optimization of valve manifold timing sequence using differential evolution algorithm. In Engineering mechanics 2014, Book of full texts. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2014.
s. 468-471. ISBN: 978-80-214-4871-1.
Detail2013
Josef Nevrlý, Miroslav Jurík, Zdeněk Němec, Milan Klapka, Štěpán Drha, Tomáš Panáček. Use of experimental stand for research kinetic energy recovery. In The 22nd International Conference on Hydraulics and Pneumatics. Ostrava: VŠB- TU Ostrava, 2013.
s. 195-202. ISBN: 978-80-248-3136- 7.
DetailSZENDIUCH, I.; KLAPKA, M.; PSOTA, B.; OTÁHAL, A. Importance of Vibration Testing for New Technological Solutions. In Proceedings EMPC 2013. 1. Grenoble: IMAPS France, 2013.
s. 144-148. ISBN: 978-2-9527467-1- 7.
DetailMAZŮREK, I.; ROUPEC, J.; KLAPKA, M.; STRECKER, Z. Load and rheometric unit for the test of magnetorheological fluid. MECCANICA, 2013, roč. 48, č. 3,
s. 631-641. ISSN: 0025- 6455.
Detail2012
ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KLAPKA, M. The Behavior of the MR Fluid During Durability Test. Journal of Physics: Conference Series, 2012, roč. 412, č. 1,
s. 1-8. ISSN: 1742-6588.
Detail | WWW2011
KLAPKA, M.; MAZŮREK, I.; STRECKER, Z. The analysis of automotive differential vibrations by means of bifurcation diagrams. In Engineering Mechanics 2011, Book of full texts. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2011.
s. 287-290. ISBN: 978-80-87012-33- 8.
DetailKLAPKA, M.; MAZŮREK, I. Assessment of the stub- shaft sleeve bearing chaotic behavior in automotive differential. In Mechatronics: Recent technological and scientific advances. 1. Berlin: Springer- Verlag Berlin Heidelberg, 2011.
s. 303-308. ISBN: 978-3-642-23243- 5.
Detail2010
KLAPKA, M.; MAZŮREK, I.; ROUPEC, J. Radial flexible bearings suitable stiffness estimation. MECCANICA, 2010, roč. 46, č. 2,
s. 293-392. ISSN: 0025-6455.
Detail | WWW2009
MAZŮREK, I.; KLAPKA, M.; ROUPEC, J. Noise Reduction of the Differential Sleeve Bearing. Engineering Mechanics, 2009, roč. 16, č. 2,
s. 93-102. ISSN: 1802- 1484.
DetailROUPEC, J.; MAZŮREK, I.; KLAPKA, M.; ČÍŽ, P. Identification of MR Fluids properties in Mechatronic Damping Elements. In Recent Advances in Mechatronics 2008 - 2009. Berlin, Heidelberg: Springer- Verlag Berlin Heidelberg, 2009.
s. 115-120. ISBN: 978-3-642-05021- 3.
Detail2008
KLAPKA, M.; ROUPEC, J.; MAZŮREK, I. Evaluation Method of Sleeve Bearing Noise from Vibrations Data. In International Conference on Fascinating Advancements in Mechanical Engineering Proceedings. Mepco Engg. College - 626005, Sivakasi, Virudhunagar district, Tamilnadu, India: Mepco Schlenck Engineering College Sivakasi, 2008.
s. 483-489. ISBN: 978-81-907108-0- 0.
DetailKLAPKA, M.; ROUPEC, J. Roller bearing fatigue test with help of CAN bus and internet. In 49. Mezinárodní konference kateder částí a mechanismů strojů. Plzeň: Západočeská univerzita v Plzni, 2008.
s. 129-132. ISBN: 978-80-7043-718- 6.
DetailKLAPKA, M.; MAZŮREK, I. Analytical software for evaluation of noise emission quality of the sleeve journal bearing. In 31. mezinárodní konference TD 2008 - DIAGON 2008 - Sborník přednášek. Academia Centrum UTB, Mostní 5139, Zlín: Academia centrum UTB ve Zlíně, 2008.
s. 60-65. ISBN: 978-80-7318-707- 1.
Detail2007
MAZŮREK, I.; KLAPKA, M. Noise emission of the mechatronic system. In Simulation Modelling of Mechatronic Systems III. mechatronics. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2007.
s. 165-176. ISBN: 978-80-214-3559- 9.
DetailKLAPKA, M.; MAZŮREK, I. Vibration behavior of the sleeve journal bearing. In Sborník přednášek 30. mezinárodní konference TD 2007 – DIAGON 2007. 2007. Zlín: Academia centrum UTB ve Zlíně, 2007.
s. 130-135. ISBN: 978-80-7318-570- 1.
DetailKLAPKA, M.; MAZŮREK, I. The Behavior Of the Sleeve journal bearing Under External Vibrations. In Sborník příspěvků 48. mezinárodní konference částí strojů a mechanizmů. 2007. Bratislava: Slovenská technická univerzita, 2007.
s. 425-432. ISBN: 978-80-227-2708- 2.
DetailKLAPKA, M.; MAZŮREK, I.; DVOŘÁČEK, P. Automotive Electronic System on Instructional Board. In Sborník příspěvků 48. mezinárodní konference částí strojů a mechanizmů. 2007. Bratislava: Slovenská technická univerzita, 2007.
s. 433-436. ISBN: 978-80-227-2708- 2.
DetailKLAPKA, M.; MAZŮREK, I.; PRAŽÁK, F. Diagnostic and education board of monitoring system. In Sborník přednášek 30. mezinárodní konference TD 2007 – DIAGON 2007. 2007. Zlín: Academia centrum UTB ve Zlíně, 2007.
s. 93-96. ISBN: 978-80-7318-570- 1.
DetailMAZŮREK, I.; DVOŘÁČEK, P.; KLAPKA, M. Using Network CAN- BUS for Assessment Transmission Load of Vehicle. In Engineering mechanics. 2007. Praha: Institute of Theoretical and Applied Mechanics Academy of Science of Czech Republic, 2007.
s. 181-182. ISBN: 978-80-87012-06- 2.
DetailMAZŮREK, I.; PRAŽÁK, F.; KLAPKA, M. Over- crossing test to evaluation of shock absorber. In Recent Advances in Mechatronics. 2007. Heidelberg: Springer Verlag, 2007.
s. 425-432. ISBN: 978-3-540-73955- 5.
Detail2006
KLAPKA, M. Studium vibrací kluzného uložení. In sborník prací 47. konference KCMS. Praha: Česká zemědělská univerzita v Praze, 2006.
s. 154-157. ISBN: 80-213-1523- 7.
Detail
*) Citace publikací se generují jednou za 24 hodin.